155
GB
Starting
Place the machine on a solid flat, non flam-
mable ground. Ensure that the cutting means
can operate freely and are not in contact with
any objects or the ground.
COLD START
1.
Set the ignition switch
5
to I (on).
2.
Set the choke lever
13
to COLD START .
3.
Press fuel pump several times until fuel
runs freely in the tank return line.
4.
Press fuel pump 6x again.
5.
Press and hold the throttle trigger
19
.
6.
Press and hold the throttle interlock
4
.
7.
Pull the recoil starter
17
to start the en-
gine.
8.
Set the choke lever
13
to WARM START .
9.
Let the machine run idle for 10-15 seconds
to warm up.
10.
Press the throttle trigger
19
to get full op-
eration speed.
WARM START
1.
Set the ignition switch
5
to I (on).
2.
Set the choke lever
13
to WARM START .
3.
Pull the recoil starter
17
to start the en-
gine.
4.
Press the throttle trigger
19
to get full op-
eration speed.
Danger!
This machine produces
noxious exhaust fumes.
Improper
use can thus lead to poisoning, loss of con-
sciousness or death.
Stopping
1.
Release the throttle interlock
4
and throttle
trigger
19
.
2.
When the engine operates idle, set the ig-
nition switch
5
to (off), to stop the en-
gine.
Warning! Blade continues to ro-
tate after the machine has been
switched off.
Wait until all components
have come to a complete stop, before touch-
ing them.
