3.2.4
Charging the device
The following steps have to be followed to set the device for charging:
•
Turn charger port cap counter clockwise to remove it and access the charger port.
•
Insert the cable from the charger into the charging port while ensuring the correct orientation of
the cable plug to the port.
•
Switch on power to the charger.
•
The display on the device will indicate the status of charging of the device.
NOTE!
The charger is designed to fit in only one orientation. DO NOT force the charger plug into the charging port on the
device. Doing so may result in damage to the product.
3.2.5
Replacing the battery
The following steps have to be followed to replace the battery on the device:
•
Remove the battery assembly screws indicated in the above image.
•
After removal of screws, the battery assembly can be pulled outward to remove it from the
device.
•
Take the new battery pack and insert it into the device.
Battery Assembly
Screws
