SETUP INSTRUCTIONS
Powering Your EVL
Connect the supplied 12V AC Adapter to the highlighted area to give power to
the device.
VIDEO CONTENT
Connecting Your EVL to a TV or Monitor
Connect one end of the VGA cable to the VGA input on the back of your EVL.
Connect the other end of the VGA cable to the VGA input on your TV or monitor.
We recommend using an SDHC card as the storage medium for the EVL
content.
The card must be formatted to FAT 32.
Converting your video Content
Before putting the content onto the SD card it needs to be in the right format
to play. See the video encoding guide.
www.blackboxav.co.uk/support
Video
720x480 30fps
10M
Photo
Audio
Category Codec/FourCC Maximum Resolution Maximum Video Bitrate
MPEG1 MPEG1
MPEG2 MPEG2
AVI
YUV400
YUV420
YUV422
YUV440
YUV444
JPG
Baseline
8000x8000
Sub Type Codec Maximum Resolution Size
No Limit
Category Codec Sample Rate
Bitrate
MP2
MP3
PCM (wav)
AC3
WMA
MP2
MP3
PCM (wav)
AC3
WMA
8-320KHz
32Kbps - 448Kbps
Page 2
The remote control which is supplied with the media
player enables you to set a range of functions which
are explained over the next few pages.
To access the menu use the setup button on the
remote. You can also use the setup button to exit the
menu.
If some of the options are greyed out you will need
to press the stop button before entering the setup
mode.
REMOTE CONTROL
MEDIA REQUIREMENTS
