SC-Keypad User Manual v1.1 Dec 2015
7
Powering your SC-K (1)
Connect the supplied 12v DC adapter to the 12v DC in.
Master Volume Control (2)
Set the master volume control (right = up left = down). The SC-K will
always start-up to half this amount allowing users to
increase/decrease the volume via the assigned volume up and
down buttons
(buttons not provided).
Connecting headphones to your SC-k (3)
The SC-K can support up to 2 headphones with the built in 3.5mm
jack, simply connect them via the headphone 1 and 2 output.
Add content to your SC-K (4)
To add content to your SC-K you must first add it to the supplied
MicroSD card and insert this into the MicroSD slot: see
‘Programming Content’ section for more details.
Connecting volume buttons (5)
As mentioned in (2) the SC-K has dedicated volume terminals
allowing you to give visitors control over volume levels. Connect 2
buttons to the designated terminals to do so. If volume buttons are
used the screen will display the changing volume.
Connecting Speakers (6)
Wire speakers to the ‘speaker L’ and ‘speaker R’ terminal block.
Follow the + and - directions if appropriate, insert wires and screw
into place.
Connecting Keypad and Screen - Cable Assembly Out (7)
The Cable Assembly connects both the Keypad and Screen to the
SoundClip.
