manualshive.com logo in svg

Blackbox Bantam Series, User Manual, Page: 7 / 28

Share
Download
Blackbox Bantam Series User Manual Download Page 7

 

Charging Steps:

 

Please charge as follows:

 

1. Connect the adapter with the charger.

 

 

2. Plug the adapter into an A/C outlet.

 

3. The charger is ready for charging if the indicator LED lights red for  

 

one second and turns off. If the indicator LED is flashing, the charger  

 

is not ready.

 

4. Place the battery into the charger aligning the battery slots with  

 

the charger guide rails.

 

5. The indicator LED lights red when charging. If the battery  

 

 

capacity is too low, the indicator LED flashes red. The battery first  

 

trickle charges and turns to normal charging automatically.

 

6. The battery is fully charged when the battery LED light is green.  

 

The charger stops charging automatically.

Precautions in Charging

Please charge the battery before initial use or after extended storage.  Please change or charge the battery if the 

power is low. If the battery power is consumed quickly even after a normal charge the battery life is finished.  Please 

replace with a new battery pack.

Do not charge the battery with the radio power on.

6 

www.blackboxradios.com

Summary of Contents for Bantam Series





























Reviews:

No comments