Page 9
This ‘Autoplay.txt’ assigns folder ‘
01
’ to PIR activation, essentially becoming a ‘
PLAY
ALL
’ button, when movment is sensed the player will display each video in sequence
then return to the attracta screen (in this example it is a single video).
Programming templates are available from our support page:
www.blackboxav.co.uk/support
PIR EXAMPLE: FOLDER ACTIVATION WITH LOOPING SLIDESHOW
The above content will loop through 3 images ‘01’, ‘02’ and ‘03’ until the PIR is activated
it will then play the video located in folder ‘01’ before returning to the looping slide-
show awaiting another PIR activation, the following ‘Autoplay.txt’ file places the VC-HD
into PIR mode.
NOTE:
The PIR is sold seperately and must be connected via the I/O port, once
connected the VC-HD is set to uninteruptible playback which means any files located in
folder ‘01’ will be played through in their entirety before the PIR can be activated again.
VC-HD placed in PIR MODE
PIR plays folder ‘01’
Volume set to 15
10.PIR & BUTTON CABLE WIRING
Information on wiring buttons and PIR connections, Button cables are provided with
the VC-HD however the PIR is sold seperately (we recommend PIR’s supplied by
blackbox-av);
PIR:
Sensor
R:
Senso
5V
GND
BUTTON WIRING:
+ 12v
Button (no)
0v
Button (com)
LED
PIR for illustrative purposes only
1 2 3 4
1
-
2
-
3
-
4
-
