background image

  

SAFETY WARNINGS AND GUIDELINES 

Please read this entire manual before using this device, paying extra attention to these safety 
warnings and guidelines. Please keep this manual in a safe place for future reference. 

 

This device is intended for indoor use only. 

 

Do not expose this device to water or moisture of any kind. Do not place drinks or other 
containers with moisture on or near the device. If moisture does get in or on the device, 
immediately remove it from its power source and allow it to fully dry before reapplying 
power. 

 

Do not touch the device, the power cord, or any other connected cables with wet hands. 

 

Do not expose this device to excessive vibration or extreme force, shock, or fluctuations in 
temperature or humidity. 

 

Do not expose this device to excessively high temperatures. Do not place it in, on, or near a 
heat source, such as a fireplace, stove, radiator, etc. Do not leave it in direct sunlight. 

 

Do not place or install this device in an area where it can be exposed to excessive amounts 
of dust, humidity, oil, smoke, or combustible vapors. 

 

Prior to operation, check the unit and power cord for physical damage. Do not use if physical 
damage has occurred. 

 

Before plugging the unit into a power outlet, ensure that the outlet provides the same type 
and level of power required by the device. 

 

Unplug this device from the power source when not in use. 

 

Take care to prevent damage to the power cord. Do not allow it to become crimped, 
pinched, walked on, or become tangled with other cords. Ensure that the power cord does 
not present a tripping hazard. 

 

Never unplug the unit by pulling on the power cord. Always grasp the connector head or 
adapter body. 

 

Ensure that power is turned off and disconnected before making any electrical connections. 

 

The remote control for this device contains a Lithium battery. Dispose of it only in 
accordance with local, state, or federal regulations for electronic waste. 

Summary of Contents for 44086











Reviews: