iv
Precautions
•
This camera should be installed by qualified personnel only.
•
There are no user serviceable parts inside.
•
Do not disassemble this camera other than to make initial adjustments.
•
Use a UL approved regulated 24 volt AC or 12 volt DC power supply.
•
Use appropriate low voltage power cable to prevent fire or electrical shock.
•
Please insure that your installation area can support the weight of the camera.
Handle this camera carefully
•
Do not use a strong or abrasive detergent when cleaning the camera.
•
Do not install near cooling or heating devices.
•
Do not install the camera in extreme temperature conditions.
Use the camera in environments where temperature
is within -40 °F to 122 °F. Use adequate ventilation if a camera is installed where high temperatures may occur.
•
Do not install or use the camera in an environment where the humidity is high.
Very high humidity levels can
reduce image quality.
•
Do not install the camera under unstable lighting conditions.
Severe lighting change or flicker can cause the camera
to work improperly.
•
Do not touch the front lens of the camera.
Be careful not to leave fingerprints on the lens or camera dome.
•
Do not drop the camera or subject it to physical shocks.
•
Do not expose the camera to rain or spill liquids on it.
If it gets wet, wipe dry immediately. Liquids can contain
minerals that corrode the electronic components.
•
Do not expose the camera to radioactivity.
If exposed to radioactivity the CCD will fail.
•
Do not disassemble the camera.
There are no user-serviceable parts inside it.
•
Do not drop the camera or subject them to physical shocks.
It can cause malfunctions to occur.
•
Never point the camera at a strong light, or exposing it to a spotlight or an object reflecting the strong light.
Smear or blooming may occur, and it can damage the image sensor.
•
Before applying power to the camera, check the power source to ensure that it is within specifications.
