Page 3
Rev. 060518
DiscountRamps.com
•
1-888-651-3431
Assembly
Step 2.
Slide the carrier frame (O) between
the support brackets (U) and secure using
the 2" bolts (D) and the small lock nuts (E).
Tighten ALL bolts including bolts from Step
1. Be careful not to overtighten.
Step 1.
Place the main hitch tube (R) on a piece
of cardboard to protect the paint, then connect the
support brackets (U) to the hitch tube using eight
3/4" bolts (C) and lock nuts (E), keeping bolts loose.
Step 3.
Slide the tie down tubes (P) into the carrier
frame (O). Then secure the carrier track (T) to the car-
rier frame using 3" bolts (B), sleeves (I), and lock nuts
(G) on each end. Note: Sleeves (I) are used to eliminate
extra play between the carrier frame and tie down tubes.
(1)
(2)
(3a)
(3b)
Note: Smaller holes face up;
larger holes face down
G
G
I
I
O
P
T
bottom view
B
B
