
ENTRY VIOLATION
MEMORY:
In the event that your system is
triggered and runs an entire cycle,
when you return to disarm it, the
LED flashes rapidly and instead of
the usual 2 chirps you will hear 3
chirps, this is to indicate that the
your system was set off., parking
lights will flash 3 times as well
(optional).
TEMPORARY REMOTE
TRIGGER & SENSOR
BYPASS:
If you
would
like to
tem-
porarily arm the system but only
want to have the starter disable
engaged (the doors, hood, and or
trunk, and any sensors would not
trigger the alarm). Press button#
1 to arm, then within 5 seconds
press button# 2.You will hear a
second confirmation chirp to let
you know that the system will
NOT monitor the doors, hood, or
trunk.The starter disable function
will be engaged.
REPLACING STOLEN
OR LOST REMOTE
CONTROLS:
Your authorized Black Widow
Dealer can program more remote
control transmitters, and erase the
codes of stolen or lost transmit-
ters at the same time so they will
not be able to operate the system.
LED STATUS INDICATORS
Off= System off
Slow Flashing= System Armed
Rapid Flashing System was
triggered while away.
On Solid(After Arming)= Pre
Arm State,usually approximately 3
seconds.
On Solid (when disarmed)=
Door/Hood is open(optional).
CHIRP INDICATIONS:
One Chirp= Armed
Two Chirps= Disarmed
Three Chirps= Disarmed, but
system was triggered while away.
Four Chirps= 30 seconds after
arming, indicates faulty sensor or
trigger.
3
+
Press
Press