2
PASSIVE ARMING
The passive arming feature allows the system to
arm automatically without user intervention.
This programmable feature may be enabled during
installation.
To arm the system passively:
1. Turn the ignition key off.‡
2. Exit the vehicle and close all doors.
• The LED flashes rapidly indicating that
the system is preparing to arm. (The
system can be armed at any time by
pressing transmitter button 1.)
• The siren will chirp 30 seconds after
the last door is closed to indicate the
system is now armed.
• The doors will lock.†*
‡
The ignition must have been on for at least 5 seconds
prior to exiting the vehicle or Passive Arming will be
bypassed.
†
If the Passive Locking feature was enabled during
installation.
DISARMING OPERATION
To disarm the system press transmitter button 2.
• The siren will chirp twice.
• The parking lights will flash twice.*
• The doors will unlock.†*
• The dome light will turn on for 30
seconds.*
†
If the Passenger Unlock Feature is installed, pressing
the unlock button will unlock only the driver's door.
Pressing the unlock button again unlocks all doors.
*
Optional feature
TAMPER ALERT
If the alarm was triggered while away from the
vehicle, the siren will chirp 3 times and the
parking lights will flash 3 times on disarming for
tamper indication. After disarming the alarm,
enter vehicle and turn ignition on.The LED will
flash the zone that was triggered 5 times (see
LED TAMPER ALERT INDICATIONS).
AUTO REARM
The Auto Rearm feature allows the system to
automatically re-arm itself in the event the
system is disarmed and a door is not opened
within 30 seconds. This programmable feature may
be disabled during installation. The Passive Arming
feature and Auto Rearm feature are related. In order
to disable the Auto Rearm feature, the Passive Arming
feature must also be disabled during installation.
NOTE: This feature will not work on vehicles with
the illuminated entry feature enabled.
SILENT ARMING/DISARMING
Press transmitter button 5 (the Shift Button)
then the Arm or Disarm button for one-time
silent operation. The system can also be
programmed for full-time silent operation
during installation.
CHIRP DELETE
For full time silent operation, the ARM/ DISARM
chirps can be permanently disabled. This feature
must be programmed during installation.
IGNITION LOCK*
The ignition locking feature allows the doors to
automatically lock 3 seconds after the ignition
key is turned on, and automatically unlock when
the ignition key is turned off. This feature may be
disabled during installation.
*
Optional feature
REMOTE PANIC
In the event of an emergency (PANIC) situation,
the system’s siren can be triggered for 30
seconds to attract attention.To activate the Panic
Feature, press transmitter button 1 for 3
seconds:
• The siren will sound.
• The parking lights will flash*.
BW3650 Owners Singles.qxd 6/5/03 11:13 AM Page 2
