• The doors will unlock.
• The dome light will turn on for 30
seconds.**
*
If the alarm was triggered while away, the system will
respond with 3 chirps and 3 parking light flashes.
**
Optional feature
AUTO REARM FEATURE
The Auto Rearm feature allows the system to
automatically re-arm itself in the event the
system is disarmed and a door is not opened
within 30 seconds. This programmable feature
may be disabled during installation. The Passive
Arming feature and Auto Rearm feature are related.
In order to disable the Auto Rearm feature, the
Passive Arming feature must also be disabled during
installation.
NOTE: This feature will not work on vehicles with
the illuminated entry feature enabled.
SILENT ARMING/DISARMING
Press transmitter button 3 to Arm or Disarm
the system silently.
CHIRP DELETE
For full time silent operation, the ARM/ DISARM
chirps can be permanently disabled. This feature
must be programmed during installation.
IGNITION LOCK
The ignition locking feature allows the doors to
automatically lock when the ignition key is
turned on, and automatically unlock when the
ignition key is turned off. This feature may be
disabled during installation.
REMOTE PANIC
In the event of an emergency (PANIC) situation,
the system’s siren can be triggered for 45
seconds to attract attention.To activate the Panic
Feature, press transmitter button 1 for 3
seconds:
• The siren will sound.
• The parking lights will flash.
Press button 1 to exit panic mode and rearm
the system. Press button 2 to exit panic mode
and disarm the system. The Panic Feature will
operate when the ignition is on.
EMERGENCY OVERRIDE
If the transmitter becomes lost or fails to
operate, the system can be disarmed by using
the emergency override feature.
To override the system:
1. Enter the vehicle.
• Because the system is armed, the siren
will sound.
2. Turn on the ignition key.
3. Press the Valet/Service Mode switch.
• The siren will stop sounding.
VALET MODE
When the system is placed into the Valet Mode
the security system will be disabled.
However, the optional keyless entry and trunk
release features will still function if installed.
To enter the Valet Mode:
1. Be sure the system is disarmed.
2. Turn the ignition key on.
3. Press and hold the valet/service mode
switch for 3 seconds.
• The LED will turn on solid indicating
the system is in Valet Mode.
To exit Valet Mode:
1. Turn the ignition key on.
2. Press and hold the valet/service mode
switch for 3 seconds.
• The LED will turn off.
• The Siren will chirp 2 times.
2
3
OPTIONAL TRUNK RELEASE
Press button 3 for approximately 2 seconds to
open the trunk.
TRUNK DISARM FEATURE
The trunk disarm feature allows the alarm to
disarm automatically whenever transmitter
button 3 is used to activate the optional trunk
release. This eliminates having to first disarm
the alarm before activating the trunk release.
This feature must be programmed during
installation.
CAR LOCATOR FEATURE
The Car Locator feature allows the parking
lights to stay on for 30 seconds after the alarm
is disarmed. This feature is not recommended
for vehicles with aftermarket or auxiliary
lighting. This programmable feature may be
disabled during installation.
DOOR TRIGGER BYPASS
To intentionally arm the system with a door
open, press button 1 to arm, then within 2
seconds press button 2. The siren will chirp to
indicate the doors will not be monitored. The
Shock Sensor will still be monitored.
REMOTE SENSOR BYPASS
To arm the system and bypass the shock sensor,
press button 1 to arm, then within 2 seconds
press button 3. The siren will chirp to indicate
the sensor will not be monitored. The doors
and hood/trunk will still be monitored.
ADDING/DELETING TRANSMITTERS
To add a new transmitter to the system or
delete a lost transmitter, have all desired
transmitters ready and follow the Code Learning
Mode sequence.
To enter Code Learning Mode:
1. Turn ignition key on, off, on, off, and leave
on within 5 seconds.
LED will flicker and parking lights will flash
once.
2. Press and hold valet switch for 2 seconds.
3. LED will flicker and parking lights will flash.
The siren will give a series of chirps.
4. Release the valet switch.
5. Program all desired remotes by pressing
button 1 on each of the transmitters. The
siren will chirp after the system has
learned each remote control.
6. Turn ignition key off.
Remotes are now programmed to the system.
LED STATUS INDICATORS
Off= System disarmed
Slow Flashing= System armed
Rapid Flashing= Passive arming indication
Rapid Flashing (after disarm)= System
was triggered while away.
On Solid= Valet mode.
On Solid (After Active Arming)= Shock
sensor inactive for 10 seconds while settling.
On Solid (when disarmed, and not in
Valet)= Door or hood/trunk is open.
CHIRP INDICATIONS:
One Chirp= Armed
Two Chirps= Disarmed
Three Chirps= Disarmed, but system was
triggered while away.
Four Chirps= 30 seconds after arming,
indicates faulty sensor or trigger.
Five Rapid Chirps= Warn away triggered
