2
To arm the system passively:
1. Turn the ignition key off.
2. Exit the vehicle and close all doors.
• The LED flashes rapidly indicating
that the system is preparing to arm.
• The siren will chirp 30 seconds after
the last door is closed to indicate the
system is now armed.
• The doors will lock.†*
†
If Passive Locking was enabled during installation.
DISARMING OPERATION
To disarm the system press button 1 again (or
button 2 on 4-button systems).
• The siren will chirp twice.
• The parking lights will flash twice then
remain on for 10 seconds.*
• The doors will unlock.* If using the
Driver Priority unlock feature only the
driver door will unlock. Press button 2
again to unlock all doors.
• The dome light will turn on for 30
seconds.*
TAMPER ALERT
If the alarm was triggered while away, the
siren will chirp and the parking lights flash 3
times on disarm for tamper indication.
SILENT ARMING/DISARMING
Press buttons 1&2 then button 1 or 2 to Arm
or Disarm for one-time silent operation.
The system can also be programmed for full-
time silent operation during installation.
IGNITION CONTROLLED LOCKS*
The ignition locks feature automatically locks
and unlocks the doors when the ignition is
cycled on or off. To avoid locking keys in the
vehicle, the ignition locking feature will be
cancelled if a door is open when the ignition
is turned on.
This feature may be disabled
during installation.
REMOTE PANIC
In the event of an emergency, the system’s
siren can be triggered for 60 seconds to
attract attention.To activate the Panic Feature,
press transmitter Button 1 for 3 seconds:
• The siren will sound.
• The parking lights will flash*.
Press button 1 again to exit panic mode. For
4-button systems press button 1 or 2 to exit
panic mode (pressing button 2 will unlock
the doors and disarm the system).The Panic
Feature will not operate when ignition is on.
*
Optional feature
EMERGENCY OVERRIDE
If the transmitter becomes lost or fails to
operate, the system can be disarmed by
using the emergency override feature.
To override the system:
1. Enter the vehicle.
• Because the system is armed, the
siren will sound.
2. Turn on the ignition key.
3. Press the Valet switch for 5 seconds.
• The siren will stop sounding.
• The starter defeat will be bypassed.
• The system will enter valet mode.
VALET MODE
When the system is placed into the Valet
Mode the security system will be disabled.
However, the optional keyless entry and
trunk release features will still function.
To enter or exit valet mode:
1. Be sure the system is disarmed.
2. Turn the ignition key on.
3. Press and hold the valet switch for 5
seconds.
• The siren will chirp 5 times to enter
valet or twice for exit.
• The LED will turn on solid indicating
BW2450.qxd 6/11/2009 4:12 PM Page 2
