Black Widow BW-0101, Owner'S Manual & Safety Instructions

Page: 7 / 15

Page 7
SAFET
y
Op
ERA
TION
M
AINTENAN
c
E
A
SSEM
b
Ly
SAFET
y
Op
ERA
TION
M
AINTENAN
c
E
SETU
p
bleeding
IMpORTANT! before first use, check for proper
hydraulic fluid level in the bottle Jack (30). Then
thoroughly test the Lift for proper operation
prior to its actual use. If the Lift appears not
to be working properly, it may be necessary
to bleed its hydraulic system of excess air.
1. Remove the Fluid Fill Plug (39a) on
the side of the Bottle Jack (30).
2. Use one foot to step on and hold the
Release Pedal (13a) down.
3. While holding the Release Pedal down,
quickly pump the Foot Pedal (27) up and down
several times to purge air from the system.
4. Check the fluid fill hole and, if necessary, top
off the jack’s Fluid Reservoir (11a) with high
grade hydraulic fluid (sold separately).
5. Replace the Fluid Fill Plug.
6. Test the Lift several times for proper operation
before attempting to lift a load. If, after purging,
the Lift still does not appear to be working
properly, do not use the Lift until it has been
repaired by a qualified service technician.
Adding Hydraulic Fluid
1. Remove the Fluid Fill Plug (39a) on
the side of the Bottle Jack (30).
2. Add high grade hydraulic fluid (sold separately)
into the fluid fill hole slowly until the fluid
just begins to run out of the hole.
3. Replace the Fluid Fill Plug.