background image

Page 1

091321

1-888-651-3431

GENERAL GUIDELINES & SAFETY

• 

It is the user’s responsibility to read and follow all instructions.

• 

Keep these instructions with the product at all times and review before each use.

• 

It is the responsibility of this product’s owner to furnish the instructions to any person that borrows 

or purchases the product

• 

Inspect the product before use to ensure it is assembled properly and all parts are in safe working 

order and free of defects

• 

Never modify this product in any way

• 

All circumstances cannot be addressed in these instructions. Please use common sense and practice 

general safety measures when using this product

• 

Parts and/or instructions are subject to change without notice

• 

ALWAYS read your ATV’s Owner’s Manual regarding the use of after market accessories and safe 

operation of your ATV

• 

ALWAYS make sure you wear safety gear while operating your ATV/UTV

• 

ALWAYS read and understand the manufacturer’s WARNINGS & INSTRUCTIONS before using the 

ATV/ UTV 3-Pin System

• 

Maintain the WARNINGS & INSTRUCTIONS for later review as needed, for instructions on usage 

to anyone borrowing or using your ATV/ UTV 3-Pin System, or to pass on when selling the unit.

• 

Never exceed the manufacturer’s weight rating of your ATV/UTV hitch. If you are unsure, always 

refer to the ATV/UTV Owner’s Manual

• 

Operating an ATV with accessories or additional implements secured to the ATV may effect the 

handling of the ATV, including braking, steering, stopping and turning

• 

DO NOT exceed 5 MPH when operating or traveling with implements attached to your ATV 

Excessive speeds can result in loss of control and can cause serious personal injuries or death

• 

Never operate your ATV/UTV on steep inclines while using the 3-Pin System, tipping or roll overs 

can occur

• 

Never carry passengers on your ATV unless your ATV is designed to carry more than one person

• 

ALWAYS keep hands and feet away from all implements while operating the ATV

• 

Never get under or between any implement while operating the ATV

• 

ALWAYS maintain proper balance and weight distribution of you ATV, you may need to add 

weight to the opposite end of the A TV to counter weight the load

Steel 3-Pin ATV 
Implement Attachment

Instructions for ATV-3PT-2140

Summary of Contents for ATV-3PT-2140

Page 1: ...n the WARNINGS INSTRUCTIONS for later review as needed for instructions on usage to anyone borrowing or using your ATV UTV 3 Pin System or to pass on when selling the unit Never exceed the manufacturer s weight rating of your ATV UTV hitch If you are unsure always refer to the ATV UTV Owner s Manual Operating an ATV with accessories or additional implements secured to the ATV may effect the handli...

Page 2: ...8 10100255W M10X25mm BOLT 1 19 AU002 2403 SWAY BRACKET 1 ALWAYS be aware of pinch to prevent injury ALWAYS inspect all nut and bolt assemblies hardware and components for damaged missing or loose part Inspect for any structural damage to product return to factory for repair or discard product if any damage is found Inspect entire product for any rust corrosion cracks freezing excessive heat or rot...

Page 3: ...to change directions flip the ratchet lock on the ratchet gear Step 3 Use the Adjustment Tube 8 9 to change the angle of selected implements by using the Quick Pin 10 Note some heavier Implements may need to contact ground to adjust Quick Pin Caution Be careful not to get under or between implement Step 4 Attach implements with 2 ID square tubes to the 3 Pin System Receiver Tube 1 and lock 3a 3a 3...

Page 4: ...le for labor charges If the product does not meet specifications as depicted in the advertisement the Authorized Dealer will refund the full purchase price of the product Questions regarding the warranty on a specific product and warranty claims should be directed to the Authorized Dealer with whom the purchase transaction was made WARRANTY LIMITATIONS The above warranty does not apply to products...

Reviews: