Page 3
Rev. 052318
DiscountRamps.com
•
1-888-651-3431
Step 2.
Place the motorcycle rack between
the support brackets and install the four M8x40
bolts (E), washers (G), and nuts (H). Securely
tighten all twelve support bracket bolts.
Step 3.
Slide the anti-tilt bracket (L) over the
hitch bar with the flat side of the bracket toward
the vehicle. Slide the rack into the trailer hitch,
install the hitch pin (sold separately), then tight-
en the four anti-tilt bolts evenly. They will pinch
the bracket on the collar of the hitch, preventing
excessive movement of the rack.
Step 4.
The ramp (B) stores on either side of
the motorcycle rack with the two supplied bolt
and nut assemblies (K).
Step 5.
The optional small wheel adapter bolt (M10 bolt - part I) can be inserted into the front of the
motorcycle rack to make the front wheel gap smaller.
Step 6.
Secure the motorcycle to the rack with
tie down straps (sold separately). Use two ratch-
et straps attached to the handlebars, two straps
attached to the rear frame of the bike, and two
wheel ties.
Fig. 2
Fig. 3
Fig. 4
Fig. 5a
Fig. 5b
Fig. 6
