#
1)
2)
3)
4)
5)
6)
7)
8)
COLOR
Red
Black
Blue
Gray
Yellow
Red/Black
Green
Black
FUNCTION
+12V In
Ground
(-) Trigger
Starter
Interrupt
Flashing
)
LED(+)
Ignition
Input (+)
Antenna
FUNCTION
Main Power. Connect this wire to the
battery POSITIVE (+) terminal with the
supplied 5 amp fuse installed at the
BATTERY end of the wire! Be sure
to read the CAUTION in item 4 of the
installation instructions.
Connect this wire to a clean, solid
GROUND.
Connect this wire to shock, glass, radar,
other sensors, or to hood, trunk, or
door pinswitches that are GROUND-
ED when the door is opened.
This output is Ground (-) whenever
the alarm is ARMED. It is used to drive
the starter interrupt relay.
Connect to 12 Volt flashing lights.
Connect to the Red wire of the BWS-
180 LED. Connect black wire from LED
to ground.
Connect ignition wire to Green
wire from the harness.
Wire on the Receiver Module.
Do not attempt to ground the
antenna wire!
TERMINAL NUMBERING AND WIRE COLOR CODES
Not part of harness:
7
