background image

rearm (if system is remotely disarmed) and
a door is not opened, within 30 seconds
the alarm will automatically rearm the sys-
tem.This feature may be disabled by turn-
ing the ignition to the on position and
pressing and holding the LOCK button on
the remote. Siren will chirp twice. Repeat
the procedure to enable the feature.
NOTE: This will not work on vehicles with
the illuminated entry feature enabled.

REPLACING STOLEN
OR LOST REMOTE CONTROLS:

Your authorized Black Widow Dealer can
program in more remote controls, and
erase the codes for stolen or lost transmit-
ters at the same time, so that they will not
operate the system.

LED STATUS INDICATORS

Off= System off in Active mode

Slow Flashing= System Armed
Rapid Flashing= Passive Pre Arm State
Rapid Flashing (after disarm)=System
was triggered while away.
On Solid= In Valet Mode.
On Solid (when disarmed, and not in
Valet)
= Door/Hood is open.

CHIRP INDICATIONS:

One Chirp= Armed
Two Chirps= Disarmed
Three Chirps= Disarmed, but system was
triggered while away.
Four Chirps= 8 seconds after arming,
indicates faulty sensor or trigger.
Six Rapid Chirps= Warn away triggered

5

Summary of Contents for BW RAS 120







Reviews: