Valet Mode:
In the event the vehicle requires servicing, washing, etc., the Valet
Mode can be activated to disable the alarm, while still allowing the
keyless entry feature to operate. The Valet Mode will also disable
the system’s passive arming feature (if programmed for passive
arming). To enter Valet Mode:
Turn the ignition key on.
Press and hold the valet/override switch for approximately 5
seconds.
The LED will turn on solid indicating the system is in Valet Mode.
To exit Valet Mode repeat the procedure above. The LED will turn
off indicating the system has exited Valet Mode.
Emergency Override
In the event the remote transmitter is lost or stolen, the
Emergency Override feature may be used to deactivate the
system. To override the system:
Turn the ignition key on.
Press and hold the valet/override switch for approximately 5
seconds.
The LED will turn off indicating the system is disarmed.
LED Status Modes:
Valet = Solid
Pre-Arm State = Solid for 2 seconds
Armed = Slow flash
Disarmed = Off
Passive Arming Sequence = Rapid flash
System triggered while away = Slow double flash
3
