VEQ-1P
OVERVIEW & INSTRUCTIONS
2
Controls & User Interface
» Power
This is a multi purpose knob: Turning it fully counter-clockwise will bypass the
processing altogether, turning it clockwise lets you adjust the linear output gain
between -10 and +10dB.
» EQ In
Engages or bypasses the EQ fi lter network. The signal will still pass the tube audio
amplifi er when in a bypassed state thus adding a gentle coloration.
» Low Band/Shelf
(Boost, Attenuante & CPS Filter Frequency)
Sets the amount of low frequency boost (0..+14dB) and attenuation (0..-18dB).
Filters are slightly off -tuned based on the frequency adjusted at the CPS knob
(cycles per second = Hertz), which will result in a dip when adjusting both
parameters at the same time („Pultec-Trick“).
» Bell Filter
(Boost, Bandwidth & KCS Filter Frequency)
Sets the amount of mid-high boost, tuned to the frequency selected with the KCS
knob (kilocycles per second = Kilohertz). Bandwidth will adjust the „sharpness“
of the fi lter, wich will result in a max boost of +10dB for a broad and +18dB for a
sharp setting.
» High-Shelf
Adjusts the amount of high frequency attenuation between 0 and roughly -18dB.
Edge frequency can be set using the Atten Select knob.
