manualshive.com logo in svg

Black Ridge BRC270, Manual, Page: 25 / 28

Share
Download
Black Ridge BRC270 Manual Download Page 25

24

25

If your engine does not start

• Check that there is the correct amount of oil in the engine 

sump, refer to pages 9 and 12.

• Check that the engine switch is to ON, refer to pages 17 -18.
• Check that you have moved the choke lever to ON, refer to 

pages 17- 18.

• Check that you have moved the fuel tap lever to ON, refer 

to pages 17-18.

• No or low fuel in the fuel tank. Fill fuel tank.
• Possible no spark. Check / replace spark plug.
• Ensure that the unloading valve is open, if not open the 

unloading valve, see page 17.

If your compressor does not built up pressure

• Check that the tank drain tap is closed.
• Check that the unloading valve is closed, if not close 

unloading valve, see page 17.

• Check that the pump air filter is clean, if not replace, see 

page 23.

If your compressor smells like burnt oil

• Check the pump oil level as it may be low.

If these tips do not work please have your unit checked 

by an authorised service centre. Call BLACKRIDGE for your 

closest centre.  

Aust. 1300 660 457  N.Z. 0800 474 876

REPAIRS

Repairs to your generator should only be carried out by an 

authorised service agent. Call BLACKRIDGE for your closest 

centre.  

Aust. 1300 660 457  N.Z. 0800 474 876

TROUBLE SHOOTING

Summary of Contents for BRC270





























Reviews:

No comments