14
15
ADJUSTING THE PRESSURE
To adjust the outlet air pressure, use the outlet pressure
regulator knob and check the pressure on the outlet
pressure gauge, Pic. 11.
If the pressure needs to be lower, turn anti clockwise.
If the pressure needs to be higher, turn clockwise.
Use the gauge to ensure you set the correct working
pressure.
Note: Different air tools require different operating
pressures. Always check with the tool manufacturer if
unsure.
PIC. 11
PIC. 12
Tank
pressure
gauge
Outlet
Pressure
Regulator
Pull to check operation
Outlet pressure
gauge
SAFETY VALVE
Pic. 12
NOTE: When checking the safety valve ALWAYS wear
safety glasses.
To check the operation of the safety valve the air tank will
need to be full. Gently pull the ring outwards. This should
release air under pressure. Release the ring and this should
stop the air out flow once the tank pressure has dropped.
If the safety valve does NOT work in this manner, STOP the
air compressor immediately and have the air compressor
checked / serviced by an authorised service centre.
IMPORTANT
NOTE
This compressor has a maximum pressure of 8 bar.
Always regulate the air pressure to match your air
tool. Different air tools require different operating
pressures. Always check with the tool manufacturer
if unsure.
AIR OUTLET
Pic. 13
This air compressor is fitted with a ‘Nitto style’ (female)
socket.
1. Slide the outer collar down.
2. Push in the ‘Nitto style’ male plug (not included).
3. Release the collar.
4. Fully and completely push the ‘Nitto style’ male plug
(not included) into the ‘Nitto style’ female socket until it
clicks.
Note: This compressor has a maximum pressure of 8 bar.
Always regulate the air pressure to match your air tool.
Different air tools require different operating pressures.
Always check with the tool manufacturer if unsure.
Outlet nitto style socket
(female)
PIC. 13
Tank
pressure
gauge
Regulator
Outlet pressure
gauge
Nitto style
outlet socket
(Air Outlet)
