to all connected
components.
Abnormal Voltage: When this LED is ON, the PG 1 is warning about under/over voltage
(greater than 130VAC or less than 90VAC)
Prote
ction
ON: When this LED is on, the PG 1’s power surge circuitry is
functioning
correctly.
If this LED is OFF, the circuit has
malfunctioned.
If it is OFF, unplug the unit
immediately.
Digital Filter (Switched) Outlets: These outlets have a special
filter
circuit that is
designed to reduce AC supply interference to your digital components
(workstation,
digital
effects,
etc
.).
They also isolate the rest of your system from noise generated by
the digital components
themselves.
Analog Audio Filter (Switched) Outlets: These outlets have a special
filter
circuit that
reduces audible noise in your analog components (mixers, dynamic
effects,
e
tc.
)
High Current Filter (Timed) Outlets: These outlets have a special
filter
circuit designed to
handle high current components like power
amplifiers
or
Active Speakers.
Gold plated ground post: Provides a
connection
point for any ungrounded
components.
Thermal Circuit Breaker: protects the PG 1 from power overloa
d.
Breaker Open: When this LED is on, the thermal circuit breaker has tripped due to an
overloa
d.
Before
resetting
the breaker,
find
the reason for the overloa
d.
Ultra high Current AC Power Cable: integral high power, heavy duty AC cable to
maximize power transfer to high current components such as
amplifiers.
Dimmer: This knob controls a
flexible
accessory li
ght.
Push on/o
ff
and turn clockwise
for
brightness.
12V XLR Lamp Socket: Provides 12VDC on PIN 2 to an accessory
lamp.
Numerical Display: Three character LED displays the line voltage at the
source.
Unswitched Convenience Outlets: These are ‘always on’
filtered
power
outlets.
Note: For best performance we recommend plugging analog components into the analog
outlets and digital to
digital.
It will not harm any components if they are plugged into any other
outlet.
Specifications:
Voltage:
115VAC 15A max
AC Mains Input: NEMA standard plug
Dimensions:
438mm (19”) x 44mm (1U) x 250mm D
Weight:
4
.2+kg
