11
8.
Remember Button:
By pressing the Rem Button while a disc is playing, the display will show the time length
of the track that is playing. If the Rem Button is pressed again, it will display the time
length of the entire CD that is playing. Press the Rem button again and the display will
show the time length of what has been played by the current track.
9.
Introduction:
Press the Intro Button and the CD player will play the first ten seconds of each track on
the CD. Push the Intro Button again to cancel Introduction.
10.
The Display of Track Numbers and their Playing Time:
a. When you insert the CD disc, or stop in the middle of playing the disc, the window will
automatically show the total number of tracks on the Compact Disc and the time
required to play the entire Disc.
b. While a disc is being played, the display window will show the number of tracks
played and how much time has been used.
_____________________________________
ADDITIONAL INFORMATION
_____________________________________
Changing the Vacuum Tubes
1. Using a 3mm Allen wrench, you need to remove four bolts.
2. Remove the top cover.
3. With the front of the DAC Transport toward you, the tubes are located in the left- and right-
hand compartments. The 6 tube pieces have a cover over them that are held in place with a
bayonet lock. To remove the cover, gently push the cover down, turn the cover
counterclockwise for one/eight of a turn and pull the cover off. The tube will now be exposed.
4. To remove the tube, pull the tube straight up out of the socket.
5. To put a new tube in, line the pins of the tube with the holes in the socket and gently push
the tube in. Try to do this procedure keeping the tube as vertical as possible to avoid bending
the tube pins.
Tube Placement:
2V1 = 12AX7
2V2 = 12AT7
2V3 = 12AU7