Black Horse Model Shark BH119, Instruction Manual Book, Page: 22 / 33

22
SHARK -
Item code: BH119 . INSTRUCTION MANUAL
C/A glue.
Rudder servo install as same as method of
elevator servo. See picture below:
Rudder servo
Rudder control horn install as same as the
way of aileron control horn. Please see pic-
tures below.
 When you are sure that everything is a
aligned correctly, mix up a generous amount
of 30 minute epoxy. Apply a thin layer to the
slot in the mounting platform and to the verti-
cal stabilizer mounting area. Set the stabi-
lizer in place and re-align. Double check all
of your measurements once more before the
epoxy cures. Remove any excess epoxy us-
ing a paper towel and rubbing alcohol and hold
the stabilizer in place with T-pins or masking
tape. Allow the epoxy to fully cure before pro-
ceeding.
C/A glue.
RUDDER CONTROL HORN INSTALLA-
TION.
Control horn of Rudder.
VERTICAL STABILIZER INSTALLATION.
Rudder servo