5
PITTS
-
ITEM CODE: BH85
.
Instruction Manual
2. Using a modeling knife, remove the cov-
ering servo tray.
Secure
Aileron
1. Install the rubber grommets and brass
eyelets onto the aileron servo.
INSTALLING THE AILERON SERVO .
4) Drill 1,6mm pilot holes through the block
of wood for each of the four mounting screws
provided with the servo.
3) Using the thread as a guide and using
masking tape, tape the servo lead to the end
of the thread: carefully pull the thread out.
When you have pulled the servo lead out, re-
move the masking tape and the servo lead
from the thread.
5. Instal servo tray with aileron servo into
the wing as same as picture below.
2x10mm.
Thread
Electric wire.
Remove covering.
Secure
2.INSTALLING THE AILERON CONTROL HORN.
(LOWER WING)
3mm x 40mm.
Nilon control clasp
.
M3 lock nut.
