Black Horse Model P.C-9 BH76, Instruction Manual Book

Page: 18 / 38

18
P.C-9
- Item code: BH76.
Instruction Manual.
Bottom side
Bottom side
Front view.
INSTALLING THE SPINNER.
Install the spinner backplate, propeller and
spinner cone. The spinner cone is held in
place using two 3mm x 12mm machine
screws.
3 x 12mm

Install one adjustable metal connector
through the third hole out from the center of
one servo arm, enlarge the hole in the servo
arm using a 2mm drill bit to accommodate the
servo connector. Remove the excess mate-
rial from the arm.
INSTALLING THE THROTTLE PUSHROD.
After installing the adjustable metal con-
nector apply a small drop of thin C/A to
the bottom nut. This will prevent the con-
nector from loosening during flight.
Connector.
Servo arm.
Throttle servo