CAP 232 -EP.
INSTRUCTION MANUAL.
7
C/A glue
Push .
3x10mm
Motor mount wood:
Rotor shaft.
Motor.
1) Slide the cowl over the motor and line
up the back edge of the cowl with the marks
you made on the fuselage.
Front view.
COWLING.
3)
Slide the cowl back over the motor.
2) While keeping the back edge of the
cowl flush with the marks, align the front of
the cowl with the crankshaft of the motor. The
front of the cowl should be positioned so the
crankshaft is in
nearly
the middle of the cowl
opening. Hold the cowl firmly in place using
pieces of masking tape.
3x10mm
