21
SPEED AIR-40 _
Item code:BH08-A.
Instruction Manual.
See picture below:
Cut the covering
away from the slot.
Temporary pin to
keep hinge centered.
Hinge.
o
1) Using a modeling knife, remove the
covering from the top of the fuselage and the
covering from over the precut hinge slot cut
into the lower rear portion of the fuselage This
slot accepts the lower vertical.
Assemble then apply drops of thin
C/A to center of hinge,on both sides.
Rudder servo.
o
2) Slide the vertical stabilizer into the slot
in the top of the fuselage. The bottom edge of
the stabilizer should also be firmly pushed
against the top of the horizontal stabilizer.
VERTICAL INSTALLATION.
Remove
covering.