5
MACCHI MC-200 -
Item code: BH104
.
Instruction Manual
2 x 10mm
3) Using the thread as a guide and using
masking tape, tape the servo lead to the end
of the thread: carefully pull the thread out.
When you have pulled the servo lead out, re-
move the masking tape and the servo lead
from the thread.
4) Drill 1,6mm pilot holes through the block
of wood for each of the four mounting screws
provided with the servo.
5. Instal servo tray with aileron servo into
the wing as same as picture below.
thread
electric wire
Secure
2.INSTALLING THE AILERON CONTROL HORN.
3mm x 20mm.
Control horn
of the aileron
Repeat the procedure for the other wing
half
.
