22
BEDE BD-5
Item code: BH142
.
Instruction Manual
2. Attach the carbon tube into the
fuselage.
Plywood of nose gear.
3. Position the battery pack and receiver
is as picture below.
Do not permanently secure the receiver and
battery until after balancing the model.
1. Plug the servo leads and the switch
lead into the receiver. You may want to plug
an aileron extension into the receiver to make
plugging in the aileron servo lead easier
when you are installing the wing . Plug the
battery pack lead into the switch.
2. Wrap the receiver and battery pack in
the protective foam to protect them from vi-
bration. Use a rubber band or masking tape to
hold the foam in place.
1.Locate the carbon tube wing dihedral
brace.
WING ATTACHMENT.
C/A glue.
Tie wrap.
INSTALLING THE RECEIVER AND
BATTERY-ESC.
4. Using a 2mm drill bit, drill a hole through
the side of the fuselage, near the receiver, for
the antenna to exit.
ESC
Battery
Receiver
carbon tube.
12 mm
485mm.
