18
L-13 BLANIK - Item code: BH135
.
Instruction Manual
MOUNTING THE TAIL WHEEL
BRACKET.
2. Using a pen, mark the locations of the
two mounting screws. Remove the tail wheel
bracket and drill 1mm pilot holes at the loca-
tions marked.
1. Set the tail wheel assembly in place
on the plywood plate. The pivot point of the
tail wheel wire should be even with the rud-
der hinge line and the tail wheel bracket should
be centered on the plywood plate.
3. Secure the tail wheel bracket in place
using three 3mm x 12mm wood screws. Be
careful not to overtighten the screws.
Bottom side
Rudder cable
3 x 15mm
Secure.
Top side.
Bottom side.
Plastic parts of rudder cable.
