5
LF-107 LUNAK
- Item code: BH145
.
Instruction Manual
1) Install the rubber grommets and brass
eyelets onto the aileron servos.
I. AILERON1.
1.INSTALLING THE AILERON SERVOS1.
2) Using a modeling knife, remove the cov-
ering at possition show below.
3) Using the thread as a guide and using
masking tape, tape the servo lead to the end
of the thread: carefully pull the thread out.
When you have pulled the servo lead out, re-
move the masking tape and the servo lead
from the thread.
4) Drill 1,6mm pilot holes through the block
of wood for each of the four mounting screws
provided with the servo.
Servo tray.
Aileron
Remove
covering
Secure.
Top side
Servo tray.
Electric
wire.
Bottom side
