18
FIESELER FI156C STORCH - EP
-
Item code: BH128
.
Instruction Manual
Cut.
C/A glue
Bottom side
E l e v a t o r
pushrod
R u d d e r
pushrod.
MOUNTING THE TAIL WHEEL
BRACKET.
1. Set the tail wheel assembly in place
on the plywood plate. The pivot point of the
tail wheel wire should be even with the rud-
der hinge line and the tail wheel bracket should
be centered on the plywood plate.
2. Using a pen, mark the locations of the
two mounting screws. Remove the tail wheel
bracket and drill 1mm pilot holes at the loca-
tions marked.
Mark point.
Plastic parts of pushrod.
3x 12mm
