Ä
21
SELECTING THE MODE
You can select the DVD player, Radio, AV, TV or SCART
using the Mode button.
Radio
To get the best performance be sure that AM and FM
antenna is connected to the AV receiver. AUDIO VFD grid
will be highlighted in radio mode.
Adjusting the frequency :
Press on the left arrow for AM and Right Arrow for FM.
Band name text and MHz, kHz grids will be displayed on
the VFD.
Press Search Forward or Search Backward to
increase or decrease the frequency till you reach the
desired channel. VFD will display the frequency.
Storing the channel in the Memory :
After adjusting the desired channel you can store it in
the memory . In order to do that ;
Press on the Select button to enter Memory Set mode.
Program grid is displayed on the VFD. You can use
Return button to cancel Memory Set mode.
Press the number button that you want to store this
channel. Use 10+ button to enter two digits. VFD will
display the preset channel number and its frequency.
You can keep 20 AM channels and 40 FM channels in the
memory.
Selecting the preset channels:
Press on the left arrow for AM and Right Arrow for FM.
Press the number button of the desired preset channel.
VFD will display the preset channel number and its
frequency. Use 10+ button to enter two digits.
Press the Skip Next or Skip Previous button to increase
or decrease the preset channel number. VFD will display
the preset channel number and its frequency
AV MODE
You can use AV connection only in Normal operation.
You can switch to your connected Video Source using
mode button. In this connection you can use your Av
receiver as an Amplifier. Standby, Mute, Speaker Volume
and Mode buttons can be used in this mode .
SCART MODE
In this mode scart audio and video inputs are used. You
can use Scart connection in Standby and Normal
operation.
IN STANDBY MODE
If there is a Video and Audio signal in AV Input of
receiver, this signal will be given as a SCART output
automatically. Standby, Open/Close, and Play buttons
can be used in this mode.
IN NORMAL MODE
You can switch to your connected Video Source using
mode button. In this connection you can use your Av
receiver as an Amplifier. Standby, Mute, Speaker
Volume and Mode buttons can be used in this mode.
TV MODE
In this mode audio input signals from output scart are
amplified and sent to 5.1 speaker outputs.
