4
ASSEMBLY
Your wheel kit requires assembly. For questions regarding the
assembly of your wheel kit, call our help line at 1-888-373-8272.
Please have your model number available.
NOTIcE
Drain oil and fuel before assembly. Failure to drain before
assembly can result in oil and fuel leaking onto the generator
and ground. Oil and fuel will also drain into the carburetor and
engine requiring disassemble to clean out.
Install Wheels
1. Tip generator up onto non-marring surface with panel side
up.
2. Insert Large Roll Pin (B) through Wheel (A) from the outside.
3. Insert the Large Roll Pin through the wheel bracket on the
generator frame.
4. Insert Large R-clip (C) into hole on the end of Large Roll Pin.
5. Repeat for second wheel.
6. Tip generator back down.
A
c
B
Install the Support Leg
1. Tip generator up onto non-marring surface with alternator/
muffler side up.
2. Attach Support Leg (D) to generator frame with Flange Bolt
(E) and Flange Lock Nut (F).
3. Tip generator back down so resting on wheels and support
legs.
D
F
E
Install the handle
1. Place Handle (G) inside the handle mounting brackets on the
frame.
2. Insert Small Roll Pin (H) into hole on frame and through
Handle and handle mounting bracket.
3. Insert Small R-clip (I) into hole on the end of Small Roll Pin
(H).
4. Repeat on other side.
G
h
I
