Black+Decker TBSV2020GS, Original Instructions Manual

Page: 9 / 16

9
ENGLISH (Original instructions)
9
ENGLISH (Original instructions)
Cleaning and emptying the vacuum
Filter agitator (Fig. H)
With the lift away dust canister (6) off the chassis (17) ,
-
Note: It is recommended that you agitate when the unit is
Note: Maximum dust collection will only be obtained with
If dust begins to fall back out of the product after it is switched
off, this indicates that the dust canister is full and requires
emptying.
To empty the dust canister (Fig. I, J)
Lift and remove the lift away dust canister (6) from the
Place the dust canister over a dust bin and press the
dust canister lid release button (6a) to empty the dust
into position.
Install the lift away dust canister (6) back onto the
chassis (17).
Lift and remove the lift away dust canister (6) from the
Place the dust canister over a trash bin and press the
dust canister lid release button (6a) to empty the dust
Note:
Empty the dust canister.
Install the dust canister onto the vacuum, until it “clicks”
Lift and remove the lift away dust canister (6) from the
Place the dust canister over a trash bin and press the
dust canister lid release button (6a) to empty the dust
Grasp the agitator wheel housing (21) and pull up
to remove.
housing (21).
Install the agitator wheel housing (21) onto the dust
canister shake off or lightly brush any loose dust from
Rinse out the dust canister (6) with warm soapy water.
(24hrs).
Note: Maximum dust collection will only be obtained with
If dust begins to fall back out of the product after it is
switched off, this indicates that the dust canister is full
and requires emptying or that there is a blockage somewhere.
ensure that they are completely dry before using again.
and correctly in position before use.
Removing and clearing the rotary brushes
(Fig. M)
Warning! To reduce the risk of injury from moving parts,
disconnect battery before cleaning or servicing.
Lift the rotary brush from its locked position.
The rotary brush (23) can now be removed.
Clean the rotary brush, and reinstall. Ensure it is secured
in its locked position before operating.
Maintenance
Your BLACK+DECKER cordless appliance has been designed
to operate over a long period of time with a minimum of main-
tenance. Continuous satisfactory operation depends upon
proper tool care and regular cleaning.
Warning! Before performing any maintenance on cordless
appliances:
Remove the battery.
Unplug the charger before cleaning it. Your charger does
not require any maintenance apart from regular cleaning.
charger using a soft brush or dry cloth.
Regularly clean the motor housing using a damp cloth. Do
not use any abrasive or solvent-based cleaner.