5
ENGLISH
(Original instructions)
Extension cables & class 1 product
u
A 3 core cable must be used as your tool is earthed and of
class 1 construction.
u
Up to 30m (100 ft) can be used without loss of power.
u
If the supply cord is damaged, it must be replaced by the
manufacturer or an authorised BLACK+DECKER Service
Centre in order to avoid a hazard.
Labels on Appliance
The following pictograms along with the date code are shown
on the appliance:
Warning!
Hot surface.
Features
1. Control panel
2. Turntable shaft
3. Turntable ring assembly
4. Glass tray
5. Observation window
6. Door assembly
7. Safety interlock system
8. Grill rack (only to be used in grill function and must be
placed on the glass tray).
Unpacking
u
Remove all packaging from the appliance.
u
Inspect the oven after unpacking for any damage such
as a misaligned or damaged door, door seals, dents or
holes in the door window and screen, and any dents in the
cavity. If any of these are seen,
DO NOT
use the oven.
Assembly
Warning!
Before assembly, make sure that the appliance is
switched off and unplugged.
u
Place the appliance on a flat, even surface.
u
Open the door (6) & place the turntable shaft (2) into the
hole in the cavity base.
u
Place the turntable ring assembly (3) into the grooves in
the cavity.
u
Align the glass tray (4) on top of the turntable ring
assembly (3).
u
Connect the appliance to a suitable electrical supply.
u
Never place the glass tray upside down. The glass
tray should never be restricted.
u
Both glass tray and turntable ring assembly must
always be used during cooking.
u
All food and containers of food are always placed
on the glass tray for cooking.
u
If glass tray or turntable ring assembly cracks or
breaks, contact your nearest authorized service center.
u
If steam accumulates inside or around the outside of the
oven door, wipe with a soft cloth. This may occur when
the microwave oven is operated under high humidity
conditions and in no way indicates malfunction of the unit.
u
Do not use the appliance outdoors.
u
Do not operate the appliance if your hands are wet. Do not
operate the appliance if you are barefoot.
u
If the power supply cord is damaged during use,
disconnect the appliance from the power supply
immediately. Do not touch the power supply cord before
disconnecting from the power supply.
u
Disconnect the appliance from the power supply when not
in use and before cleaning.
Safety of others
u
This appliance is not intended for use by persons
(including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction
concerning use of the appliance by a person responsible
for their safety.
u
Children should be supervised to ensure that they do not
play with the appliance.
u
Do not allow children or any person unfamiliar with these
instructions to use the appliance.
u
Do not allow children or animals to come near the work
area or to touch the appliance or power supply cord.
u
Close supervision is necessary when the appliance is
used near children.
After use
u
Switch off and remove the plug from the socket before
leaving the appliance unattended and before changing,
cleaning or inspecting any parts of the appliance.
u
When not in use, the appliance should be stored in a
dry place. Children should not have access to stored
appliances.
Electrical safety
Before use, check that the mains voltage corresponds to the
voltage on the rating plate.
!
This product must be earthed. Always
check that the mains voltage corresponds
to the voltage on the rating plate
u
Appliance plugs must match the outlet. Never modify the
plug in any way.
u
Do not use any adapter plugs with earthed (Class 1)
appliances. Unmodified plugs and matching outlets will
reduce the risk of electric shock.
u
To avoid the risk of electric shock, do not immerse the
cord, plug or motor unit in water or other liquid.
Summary of Contents for MZ42PGSS
Page 11: ...11 ...