EN-13
a. In waiting states, press "0/FAVOURITE" twice, stop pressing until the screen displays
"2".
b. Press " TIME COOK " once, then press "3","2“,”0" in order.
c. Press "POWER" once, "PL10" display, then press "8" and "PL8" displays.
d. Press "START/+30SEC."once to save the setting. Buzzer sounds once then the
screen will display "2". If you press "START/+30SEC." again, the procedure will be
operated as the memory 2.
e. If the electricity is not cut off, the procedure will be saved all the time. If it is, the
procedure need to reset.
f. When you want to run the saved procedure, in waiting states, press"0/FAVOURITE"
twice, screen displays "2", then press "START/+30SEC." to start cooking.
Note:
Auto menu can not be set in memory function.
(1) In waiting state, press "Dinner Plate", "Fresh Vegetable" or "Frozen Vegetable",
the screen will display "SC".
(2) Press "
" to start
cooking.
START/
sensor
"
"
SC
will flash in the
display.
(3) The sensor will sound once when the steaming is emanated.The surplus time will
display.
+30 Sec
15.Sensor Cook
Example: To set the following procedure as the first memory, that is memory 1.
To cook the food with 80% microwave power for 3 minutes and 20 seconds and
then cook the food with 90% microwave power for 4 minutes .
The steps are as follow:
a. In waiting states, press "0/FAVOURITE" once, stop pressing until the screen displays
"1".
b. Press " TIME COOK " once, then press "3","2“,”0" in order.
c. Press "POWER" once, "PL10" display, then press "8" and "PL8" displays.
screen will display "2". If you press "START/+30SEC." again, the procedure will be
operated as the memory 2.
d. Press " TIME COOK " once, then press "4","0“,”0" in order.
e. Press "POWER" once, "PL10" display, then press "9" and "PL9" displays.
f. Press "START/+30SEC."once to save the setting. Buzzer sounds once then the
16.
Favourite
Function
(1) Press "0/FAVOURITE" to choose memory 1-3 procedure. The screen will display 1,2,3.
(2) If the procedure has been set, press "START/+30SEC." to use it. lf not, continue to set
the procedure. Only one or two stages can be set.
(3) If the procedure has not been set, after finishing the setting,
press"START/+30SEC."once to save the procedure and turn back to the waiting states. If
press "START/+30SEC." it will start cooking at once and save the procedure too.
Example: To set the following procedure as the second memory, that is memory 2.
To cook the food with 80% microwave power for 3minutes and 20 seconds.
The steps are as follow:
Summary of Contents for EM262AMY-PHB
Page 33: ......
