7
ENGLISH
(Original instructions)
LED Patterns
Charging
Battery Fault
Charger Fault
Battery Hot
Press the button (1) again, and the unit goes to a
BOOST
mode.
Pressing the button (1) again will turn the product
off.
Using the pull out crevice tool (Fig. B,C)
Extend the crevice tool (4) as shown in figure C,
until it clicks in place. The push in brush (9) can be
fitted if required for dusting and upholstery cleaning.
To retract the crevice tool (4) press the crevice tool
release button (4a) allowing it to return to its normal
position (Fig. B).
Attaching the power head (Fig. D)
Slide the nozzle (3) into the opening of the power
head (10), ensuring that the connectors (10a)
engage with the recesses (3a). An auadible click will
be heard.
Detaching the power head (Fig. E)
Push th power head release button (10b).
Lift the main dustbuster unit from the power head
(10).
Removing the beater bar from the power head
for cleaning (Fig. F)
Press the beater bar release button (10c).
Lift the beater bar (10d) up and out of the power
head.
The beater bar can now be freed from any hair and
accumulated debris.
Charging (Fig. G)
Place the appliance onto the charging base (8) and
plug into the electrical outlet.
Switch the electrical outlet on. The LED charging
indicator (B) will illuminate.
13. LED Charging display
Battery icon is illuminated when appliance is switched
on and will flash when the battery is almost depleted
charging. It will also flash during charging (See LED
pattern chart in this manual).
14. BOOST mode
Illuminates when the appliance is in BOOST mode.
Warning!
NEVER charge the unit with the power head
attached, as this will cause the unit to unbalance and may
cause safety problems.
7
13
14
Dual LED Display
