Black+Decker CM3005S, Use And Care Manual

Page: 9 / 28

9
BREWING TEA
Note: It is not necessary to set the clock to brew tea unless you want to use
DELAYED BREWING.
1. Open cover.
2. Fill water reservoir with desired amount of cold tap water. Do not exceed the
12-cup (MAX) level on the water reservoir.
3. Remove the permanent coffee filter and the filter basket from the coffeemaker
to avoid getting coffee flavor in the tea.
4. Close cover. Fill the removable stainless steel permanent tea filter with the
desired amount of loose tea leaves.
5. Insert the tea filter with the arc at the top of the basket placed toward the pour
spout on the carafe; press down until it is securely in place.
6. Make sure carafe lid is properly attached to the carafe. Close the lid.
Note: Hot water may overflow if carafe lid is not properly placed.
7. Place carafe on the “Keep Hot” carafe plate.
8. Plug power cord into an outlet.
9. Press the TEA button. Its light illuminates.
10. Press the ON/OFF button; its light illuminates and brewing begins.
11. When water stops flowing into carafe, the tea will be held for 5 minutes to
steep.
12. When tea is ready, the coffeemaker beeps when steeping cycle is complete.
The time since brewing is illuminated at the bottom of the LCD.
Important: Sneak-A-Cup
TM
feature cannot be used when making tea. You
must wait until the tea has finished brewing.
13. The coffeemaker will keep brewed tea hot for 2 hours and then automatically
turn off. (See KEEPING COFFEE and TEA HOT - AUTO OFF section.)
14. To turn off the coffeemaker at any time press the ON/OFF button.
15. Unplug appliance when not in use.
Note: Do not leave tea in the tea pot or tea leaves in the stainless steel
permanent filter overnight.