Black+Decker BXEEFT45E, Manual

Page: 5 / 52

ENGLISH (Original instructions)
5
♦ Store this appliance out of reach of children and/or
persons with physical, sensory or reduced mental or lack
of experience and knowledge.
♦ Make sure that dust, dirt or other foreign objects do not
block the fan grill on the appliance.
♦ Keep the appliance in good condition. Check that the
moving parts are not misaligned or jammed and make
sure there are no broken parts or anomalies that may
prevent the appliance from operating correctly.
♦ Never leave the appliance connected and unattended if
is not in use. This saves energy and prolongs the life of
the appliance.
Service:
♦ Any misuse or failure to follow the instructions for use
renders the guarantee and the manufacturer’s liability
null and void.
DESCRIPTION
A On / Off button
B Oscillation button
C Speed selection button
D Air flow modes selection button
E Timer control button
F Ventilation grill
G Front base
H Back base
I Remote control
J LED display
If the model of your appliance does not have the accesso-
ries described above, they can also be bought separately
from the Technical Assistance Service.
INSTALLATION
♦ Be sure to remove all packaging material from inside the
appliance.
♦ Ensure that the fan is switched off from the supply mains
before start any installation or assembly operation.
♦ The appliance should be used with its base fitted.
Assembling the battery/s:
♦ Caution: During the handling of batteries, do not touch
both poles at the same time, as this will provoke the par-
tial discharge of the stocked energy therefore affecting
longevity.
♦ Remove the cover of the battery compartment.
♦ Check that the plastic covering that protects the battery
has been removed (some batteries are sold with a
protective covering)
♦ Put the battery in its compartment, respecting the
polarity (Fig.2).
♦ Replace the cover of the battery compartment.
♦ N.B. When changing the batteries, the configuration of
the appliance will be removed, and you will need to reset
the parameters of the appliance.
Assembling the base:
♦ To fix the base into the appliance, place the appliance
face down.
♦ Fit the base with the column and secure it with the
screws provided (Fig.1).
♦ Stand the appliance up again so as to check that the
base works properly.
INSTRUCTIONS FOR USE
Before use:
♦ Make sure that all products’ packaging has been
removed.
Use:
♦ Unroll the cable completely before plugging it in.
♦ Connect the appliance to the mains.
♦ Guide the appliance to direct the flow of air in the desired
direction.
♦ Turn the appliance on, by using the on/off button.
♦ Select the desired ventilation speed.
Timer function:
♦ The appliance’s operating time can be controlled.
♦ To program the operating time simply select it using the
(E) button.
♦ The time programmed or remaining time will appear on
the display (J) (from 0,5h to 7,5h).
♦ After the selected time the appliance will switch off
automatically.
Oscillation function:
♦ The oscillation function makes it possible to direct the
flow from the apparatus so that it automatically alter-
nates over a range of 75º.