Page 12
BEFORE YOU CALL FOR SERVICE
IF THE APPLIANCE FAILS TO OPERATE:
A) Check to make sure that the appliance is plugged in securely. If it is not, remove
the plug from the outlet, wait 10 seconds and plug it in again securely.
B) Check for a blown circuit fuse or a tripped main circuit breaker. If these seem to be
operating properly, test the outlet with another appliance.
IF NONE OF THE ABOVE SOLVES THE PROBLEM, CONTACT A QUALIFIED
TECHNICIAN. DO NOT TRY TO ADJUST OR REPAIR THE APPLIANCE YOURSELF.
IMPORTANT
DO NOT RETURN THIS PRODUCT TO THE STORE
If you have a problem with this product, please contact the
W Appliance Co. Customer Satisfaction Center at
844-299-0879 or [email protected].
DATED PROOF OF PURCHASE, MODEL # AND SERIAL #
REQUIRED FOR WARRANTY SERVICE
CLEANING AND MAINTENANCE
1. Before cleaning and maintenance, stop the ice making process and take out the
plug from power outlet. Wait until the appliance has cooled down.
2. Clean the appliance with a soft and damp cloth, then thoroughly dry the appliance
with a clean and dry cloth.
3. Clean the ice cube bucket and ice scoop in soapy water. Rinse and dry them
thoroughly.
4. The self-cleaning function should be conducted before you use the ice maker for
the first time or if you haven’t used it for a long time. (See the “SELF-CLEANING
MODE” section)
5. Always drain water in the ice maker if it will not be used for a long time.
SET UP & USE
TROUBLESHOOTING & WARRANTY
Summary of Contents for BIMY126S
Page 2: ...Page 2...
Page 15: ...Page 15...
