English
8
Carrying the mower (Fig. A)
WARNING:
Rotating blade can cause serious injury.
Release both ON/OFF switches
3
to turn mower off
and unplug mower before lifting, transporting, or
storing the mower. Store in a dry place.
• The mower can be carried using the convenient carry
handles
10
.
Removing Blade (Fig. O, P)
WARNING:
Ensure the blade has completely stopped
and disconnect the mower from the power source.
WARNING:
Only use the specified replacement blade:
BEMW472BH and BEMW482BH release
ON/OFF
switches
2
to turn mower off, WAIT FOR THE BLADE
TO STOP, AND UNPLUG MOWER.
CAUTION:
Whenever the blade is being removed,
installed or sharpened, wear gloves and proper eye
protection. Be careful of sharp edges on blade.
1. Cut a piece of 2x4 wood
14
(about 1 foot long)
(305 mm) to keep blade from turning while removing
flange nut.
2. Turn the appliance onto its side.
nOTE:
Wear gloves and proper eye protection. Be
careful of sharp edges of blade.
3. Position piece of wood
14
to keep blade from turning
as shown in Fig. M.
4. Use a 9/16 inch wrench
16
to loosen and remove the
blade bolt
15
by turning counterclockwise.
5. Pull off blade
17
, blade insulator
18
, as shown in
Fig. N. Examine all pieces for damage and replace
if necessary.
Fig. O
14
16
17
Fig. P
15
18
17
WARNING:
Do not work towards the cable as shown
in Fig. K.
Fig. J
5
Fig. K
Emptying the grass catcher
1. Release the ON/OFF switches
3
and unplug the mower.
2. Remove the grass catcher
8
.
3. Empty the contents.
Cable storage (Fig. N)
The cable holders
6
provide a safe and convenient way to
store the extension cord when not in use.
1. Wrap the extension cord around the cable holders in a
Figure eight pattern.
Fig. N
6
