6
ENGLISH
(Original instructions)
u
The work light will still operate when the tool is in the
centre (lock off position).
Hints for optimum use
u
Always use the correct type and size of screwdriver bit.
u
If screws are difficult to tighten, try applying a small
amount of washing liquid or soap as a lubricant.
u
Use the forward/reverse/lock off collar in the center posi
-
tion to loosen very tight screws or to firmly tighten screws.
u
Always hold the tool and screwdriver bit in a straight line
with the screw.
u
When screwing in wood, it is recommended to drill a
pilot hole with a depth equal to the length of the screw.
A pilot hole guides the screw and prevents splintering or
distortion of the wood. For the optimum size of the pilot
hole, refer to the table below.
u
When screwing in hardwood, also drill a clearance hole
with a depth equal to half the length of the screw. For
the optimum size of the clearance hole, refer to the table
below.
Screw size
Pilot hole Ø
(soft wood)
Pilot hole Ø
(hard wood)
Clearance hole
No. 6 (3.5mm)
2.0mm
2.5mm
4mm
No. 8 (4mm)
3.2mm
3.5mm
5mm
No. 10 (5mm)
3.5mm
4mm
5.7mm
Maintenance
Your BLACK+DECKER cordless appliance has been designed
to operate over a long period of time with a minimum of
maintenance. Continuous satisfactory operation depends
upon proper tool care and regular cleaning.
Warning!
Before performing any maintenance on cordless
appliances:
u
Remove the batteries.
u
Regularly clean the motor housing using a damp cloth. Do
not use any abrasive or solvent-based cleaner.
u
Regularly clean the motor housing using a damp cloth. Do
not use any abrasive or solvent-based cleaner.
u
Regularly tap bit holder to remove any dust from the
interior.
Protecting the environment
Z
Separate collection. Products and batteries
marked with this symbol must not be disposed of
with normal household waste.
Products and batteries contain materials that can be
recovered or recycled reducing the demand for raw materials.
Please recycle electrical products and batteries according to
local provisions. Further information is available at
www.2helpU.com
Technical Data
BCF601
Voltage
V
dc
6
Battery
AA Alkaline x 4
Weight
(without batteries)
Kg
0.24
Weight
(with batteries)
Kg
0.33
Level of sound pressure according to EN 62841:
Sound pressure (L
pA
) 60,0 dB(A), uncertainty (K) 3 dB(A)
Sound power (L
WA
) 71 dB(A), uncertainty (K) 3 dB(A)
Vibration total values (triax vector sum) according to EN 62841:
Screwdriving without impact (a
h
) 0,5 m/s
2
, uncertainty (K) 1.5 m/s
2
Fitting and removing a screwdriver bit (Fig. C)
u
To fit a screwdriver bit (9), push it into the bit holder (5a or
5b) until it locates.
u
To remove a screwdriver bit, pull it straight from the bit
holder.
Use
Warning!
Let the tool work at its own pace. Do not overload.
Forward/reverse/lock off collar (Fig. D)
u
The forward/reverse/lock off collar (2) allows you to use
the tool as a regular manual screwdriver. You can give
an extra twist to firmly tighten a screw or to loosen a very
tight screw.
u
To activate the lock off feature, turn the collar (2) to the
centre position.
u
To release the lock off, turn the collar (2) to the right or left.
Operating the tool (Fig. E, F)
u
Make sure the forward/reverse/lock off collar (2) is
released.
u
To tighten a screw, turn the forward/reverse/lock off collar
(2) to the right and keep the on/off switch (1) depressed.
u
To loosen a screw, turn the forward/reverse/lock off collar
(2) to the left and keep the on/off switch (1) depressed.
u
To switch the tool off, release the on/off switch (1).
u
While the on/off switch (1) is depressed, the work light (6)
will be activated.
