XERXES INSTRUCTION MANUAL
REV 0.7
Page
20
of
21
mode (NO=last note, Low, or High)
▪
PRESET VOLUME* (-6 to +6 dB)
Adjusts the volume for current patch
▪
AMOUNT MODE
o
COMMON
o
INDIVIDUAL
LFO Destination Amount mode
Amount knob affects all destinations equally
Amount knob can be customized for each LFO
destination by holding down the destination
button while adjusting the Amount knob
▪
CALIBRATION
o
KNOBS
▪
SETS CENTER DETENT
▪
SET MAX
o
FILTERS
▪
TUNE ALL VOICES
▪
TUNE VOICE 1-8
o
LED TEST
o
MICROTUNING (OFF/ON)
o
DEBUG
▪
PANEL KNOB VALUES
o
TUNING PROGRAM (1-128)
Sets the center detents for bipolar knobs only
Sets knob maximum for all knobs
Tunes the filter for all voices
Enables filter calibration for selected voice
Turns on all LEDs for inspection
Enables microtuning functionality
Displays the actual knob values as they are read
from the front panel
Selects uploaded microtuning program
▪
TIME
o
LFO MAX (1-100 Hz)
o
LFO MIN (0.01-0.1 Hz)
o
LFO MODE
▪
MONO
▪
POLY
o
GLIDE TIME MAX (1-10 seconds/octave)
o
ADSR MULT (1-4x)
Sets maximum LFO frequency (40 Hz default)
Sets minimum LFO frequency (0.02 Hz default)
LFO affects all notes equally at the same time
LFO affects all notes independently
Maximum glide time for Glide knob (2s default)
Lengthens the time of ADSR envelope
▪
ABOUT
Displays system information
* NOTE: Settings that are saved with each patch are marked with an asterisk (need to review)
REAR PANEL
Rear panel contains the power, MIDI, and audio connections.
(TODO: Need updated graphic)
POWER: External power supply input, rated 9-24 VDC, 4 Amps
USB: USB connection for additional MIDI connectivity
