A
C
37
38
34
36
PS
PS
PS
90
86
19
89
84
88
2
85
87
17
35
33
32
PS
PS
PS
89
F
31
30
-1 IT IS VERY IMPORTANT TO RESPECT THE
MEASURES GIVEN IN THE NOTICE, IF NOT MAST
COULD NOT PROPERLY SIT ON THE DECK.
-2 FIRST, CEMENT RESIN PART 88 ON THE BRIDGE
AND LET IT DRY FOR AT LEAST 24 HOURS. PART
IS PARALLEL TO THE DECK.
-3 INSERT LADDER PE36 BY THE TOP, FOLD PE
PART 35 IN U (SAME DIAMETER AS THE MAST)
AND CEMENT IN PLACE. THEN ASSEMBLE ALL
YARDARM PARTS, AND CEMENT LADDER PE36
IN PLACE. CEMENT PE LADDER 38, AND ADD ALL
THE RESIN PARTS TO THE MAST. AT THIS STAGE
OFF THE ASSEMBLY MAST COULD BE PUT IN ITS
DEFINITIVE PLACE ON THE HULL.
-4 LASTLY BUILD ALL THE ACCESSORIES
FOUND ON THE MAST TOP, PLATFORMS, RADAR
ANTENNA, ETC... AND YOU’RE DONE !
Summary of Contents for Cannon Class Destroyer Escort French Navy
