724-746-5500 | blackbox.com
Page 14
Chapter 4: Operation
4.3 Copy (New) Monitor EDID
When using a monitor (EDID compliant) for display, the transmitter’s EDID Copy
function will enable EDID communication between the monitor and transmitter for
optimal video quality. Follow the instructions below:
Step 1. Power “ON” the transmitter unit.
Step 2. Connect the EDID-compliant monitor to the VGA port on the transmitter
unit and power on the monitor.
Step 3. Press the button “EDID Copy” button and release the button RIGHT AFTER
the LED starts flashing green (approximately 3–4 seconds).
Step 4. The power LED lights steady GREEN, indicating that the EDID Copy is
completed.
NOTE: If the LED flashes RED, check the following:
a. Is the monitor properly connected?
b. Is the monitor powered on?
c. The monitor’s EDID data might not be applied. Repeat Steps 2 and 3 above.
