724-746-5500 | blackbox.com
Page 16
Chapter 4: Operation
4. Operation
4.1 LED Indicators
LEDs 1–4
Figure 4-1. Top and front panel of the switch.
Table 4-1. LED Indicators
LEDs 1–4
Switch/Auto/Priority/Modes Status
The selected LED emits green and
goes off 3 times per 2 seconds. The
non-selected LED goes off.
The input video signal isn't ready.
The selected LED emits green and
goes off once per 2 seconds.
The input video signal is ready but cannot
detect the monitor.
The selected LED emits steady
green.
The input video signal is ready and can
detect the monitor.
The selected LED emits green with
red flashing 3 times.
The input video signal and monitor HDCP
do not match.
Off
Not selected: The LED turns off when it’s
not selected, no matter what the source
condition is (with or without source input,
HDCP…etc.).
