29
1.877.877.2269
BLACKBOX.COM
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.877.877.2269
CHAPTER 4: BASIC OPERATION
The Enet Average field displays current average output on the Ethernet port.
NOTE: This field can be helpful to determine if the HLS streaming level has been reached.
The Messages field receives messages reported by the encoder during operation.
4.14 CHANGING THE DEVICE NAME
By default, the encoder is automatically assigned a name by combining the string “encoder” or “encoder2” and the MAC address of
the encoder. This name can easily be changed to something more descriptive using the procedure below.
1. Log in to the Maestro web interface. See The Maestro Web Interface for more information.
2. Click the Device tab.
3. Enter the desired name in the Device Name field.
FIGURE 4-36.
4. Click the Apply button to save the changes or click the Reset button to cancel changes and revert to the previous settings.
4.15 RESETTING THE VS-2002-ENC OR VS-2004-ENC
The encoder can be reset to factory-default settings by clicking the Default button under the Device tab or by pressing the NAV/
Control button on the unit. (See the next page for details.) When the encoder is reset to factory default settings, the IP address will
be reset to will be set to DHCP mode.
4.15.1 USING MAESTRO
1. Log in to the Maestro web interface. See The Maestro Web Interface for more information.
2. Click the Device tab.
3. Click the Default button, under Actions.